-
-
Skip navigation
(Access key: S).
Contact information.
Due to proprietary concerns, this project is password protected. The following project
description will give you a brief overview of the project. If you would like more information,
please contact a member of the project team--they will be able to share whatever
information they can with you.
Password Protected Site
Develop a device that can measure the pressure of medical gasses in useful ranges. The dimensions must be less than 4in x 4in x 1in. This device must be mass producible/kitable and cost less than $5 per unit. It cannot use any custom parts. These devices will be used in developing countries on ventilation machines.
Team Photo:
From left to right: Mike, Chris, Claire, Ksenija
Preliminary Drawing of design:
Final Schematic of Prototype:
Testing data of final transducer and LED output.
