A free version of the PDF viewer, Adobe Acrobat Reader, is available for download at no charge from the Adobe website. The free Adobe Acrobat Reader program is all that is required to view and print the PDF files that are available from the MA/RS website.

All journal and conferance papers are available for download at IDL website 

1994

1. Ceglarek, D., Shi, J., Wu, S.M., 1994 "A Knowledge-based Diagnosis Approach for the Launch of the Auto-body Assembly Process," Trans. of ASME, Journal of Engineering for Industry, Vol. 116, No. 4, pp. 491-499.

1995

2. Ceglarek, D., Shi, J., 1995 "Dimensional Variation Reduction for Automotive Body Assembly," Manufacturing Review, Vol. 8, No. 2, pp. 139 - 154.(This paper is featured on the Cover Page of the Manufacturing Review journal. View the Cover Page)

1996

3. Ceglarek, D., Shi, J., 1996 "Fixture Failure Diagnosis for the Autobody Assembly Using Pattern Recognition," Trans. of ASME, Journal of Engineering for Industry, Vol. 118, No. 1, pp. 55-66.

4. Shiu, B.W., Ceglarek, D., Shi, J., 1996 "Multi-stations Sheet Metal Assembly Modeling and Diagnostics," Trans. of NAMRI, Vol. XXIV, pp.199-204.

1997

5. Shiu, B.W., Ceglarek, D., Shi, J., 1997 "Flexible Beam-Based Modeling of Sheet Metal Assembly for Dimensional Control," Trans. of NAMRI, Vol. XXV, pp. 49-54

1998

6. Ceglarek, D., Shi, J., 1998 "Design Evaluation of Sheet Metal Joints for Dimensional Integrity," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 2, p. 452-460.

7. Khan, A., Ceglarek, D., Ni, J., 1998 "Sensor Location Optimization for Fault Diagnosis in Multi-Fixture Assembly Systems," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 120, No. 4, pp. 781-792, also in 1996 ASME International Mechanical Engineering Congress and Exposition, MED-4, pp. 473-484, Atlanta, GA..

8. Ceglarek, D., 1998 "Multivariate Analysis and Evaluation of Adaptive Sheet Metal Assembly Systems," Annals of CIRP, Vol. 47/1, pp. 17-22.

1999

9. Khan, A., Ceglarek, D., Shi, J., Ni, J., Woo, T. C., 1999 "Sensor Optimization for Fault Diagnosis in Single Fixture System: A Methodology," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 121, No. 1, pp. 109-117.

10. Ceglarek, D., Shi, J., 1999 "Fixture Failure Diagnosis for Sheet Metal Assembly with Consideration of Measurement Noise," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 121, No. 4, pp. 771-777, also in Proceedings of the Second S.M. Wu Symposium on Manufacturing Science, pp. 168-177, Ann Arbor, MI, May 24.

2000

11. Khan, A., Ceglarek, 2000 "Sensor Optimization for Fault Diagnosis in Multi-Fixture Assembly Systems with Distributed Sensing," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 122, No. 1, pp. 215-226, also in 1998 ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, MED-Vol. 8, pp. 315-324.

12. Rong, Q., Ceglarek, D., Shi, J., 2000 "Dimensional Fault Diagnosis for Compliant Beam Structure Assemblies," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 122, No. 4, pp. 773-780, also in 1998 ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, MED-Vol. 8, pp. 93-102.

2001

13. Rong, Q., Shi, J., Ceglarek, D., 2001 "Adjusted Least Squares Approach for Diagnosis of Compliant Assemblies in the Presence of Ill-conditioned Problems," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 123, No. 3, pp. 453-461.

14. Ceglarek, D., Li, H., Tang, Y., 2001 "Modeling and Optimization of Fixture for Handling Compliant Sheet Metal Parts," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 123, No. 3, pp. 473-480, also in 1999 ASME International Mechanical Engineering Congress and Exposition, Nashville, TN, DE-Vol. 103, pp.89-100.

2002

15. Li, H.F., Ceglarek, D., Shi, J., 2002, "A Dexterous Part Holding Model for Handling Compliant Sheet Metal Parts," Trans. of ASME, Journal of Manufacturing Science and Engineering, Vol. 124, No. 1, pp. 109-118.

16. Ding, Y., Shi, J., Ceglarek, D., 2002, "Diagnosability Analysis of Multistage Manufacturing Processes," ASME Transactions, Journal of Dynamic Systems, Measurement, and Control, Vol. 124, No. 1, pp. 1-13.

17. Ding, Y., Ceglarek, D., Shi, J., 2002, "Fault Diagnosis of Multistage Manufacturing Processes by using State Space Approach," ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 124, No. 2, pp. 313-322.

18. Li, H.F., Ceglarek, D., 2002 "Optimal Trajectory Planning for Material Handling of Compliant Sheet Metal Parts," Trans. of ASME, Journal of Mechanical Design, Vol. 124, No. 2, pp. 212-222, also in Proceedings of the Japan-USA Symposium on Flexible Automation, Hiroshima, Japan, July 15-17, 2002.

19. Ding, Y., Ceglarek, D., Shi, J., 2002, "Design Evaluation of Multi-station Assembly Processes by Using State Space Approach," Trans. of ASME, Journal of Mechanical Design, Vol. 124, No 3, pp. 408-418, also in Proceedings of the ASME 2002 Design Engineering Technical Conferences (DETC) and Computers and Information in Engineering Conference (DETC2002/DFM-34192), Montreal, Canada, September 29-October 2, 2002.

20. Huang, W., Ceglarek, D., 2002 "Mode-based Decomposition of Part Form Error by Discrete-Cosine-Transform with Implementation to Assembly and Stamping System with Compliant Parts," Annals of CIRP, Vol.51 No.1, pp. 21 -26.

2003

21. Shiu, B.W., Apley, D., Ceglarek, D., Shi, J., 2003 "Tolerance Allocation for Sheet Metal Assembly using Beam-Based Model", Trans. of IIE, Design and Manufacturing,, Vol. 35, No. 4, pp. 329-342. (April 2003). The paper was also summarized and featured in the March 2003 edition of Industrial Engineer (formerly IIE Solutions). " View The Summary".

22. Kong, Z., Ceglarek, D. 2003, "Fixture Configuration Synthesis for Reconfigurable Assembly Using Procrustes-based Pairwise Optimization," Transactions of NAMRI, Vol. 31, pp. 403-410.

23. Ding, Y., Kim, P., Ceglarek, D., Jin, J., 2003, "Optimal Sensor Distribution for Variation Diagnosis in Multi-station Assembly Processes," IEEE Transactions on Robotics and Automation, Vol. 19(4), pp. 543-556.

24. Kong, Z., Ceglarek, D. 2003, "Rapid Deployment of Reconfigurable Assembly Fixtures using Workspace Synthesis and Visibility Analysis," Annals of the CIRP, Vol. 52/1, pp. 13-16.

25. Camelio, J., Hu, S.J., Ceglarek, D., 2003, "Modeling Variation Propagation of Multi-station Assembly Systems with Compliant Parts," Trans. of ASME, Journal of Mechanical Design, Vol. 125, No. 4, pp. 673-681, also in the 6th Design for Manufacturing Conference, ASME International 2001 Design Engineering Technical Conferences (DETC), September 9-12, 2001, Pittsburgh, Pennsylvania.

2004

26. Huang, W., Kong, Z., Ceglarek, D., Brahmst, E., 2004 "The Analysis of Feature-based Measurement Error in Coordinate Metrology," IIE Transactions on Design and Manufacturing, Vol. 36, No. 3, pp. 237-251.

27. Ceglarek D, Jin J, 2004, "Modeling and analysis for complex production systems. Position statement," International Journal of Flexible Manufacturing Systems, Vol. 16, No.1, pp. 5-9

28. Ceglarek, D., Huang, W., Zhou, S., Ding, Y, Kumar, R., Zhou Y., 2004, "Time-based Competition in Manufacturing: Stream-of-Variation Analysis (SOVA) Methodology- Review," International Journal of Flexible Manufacturing Systems, Vol.16, No.1, pp.11-44.

29. Huang, W., Ceglarek, D., 2004, "Tolerance Analysis for Design of Multistage Manufacturing Processes using Number-Theoretical Net Method (NT-net)," International Journal of Flexible Manufacturing Systems, Vol. 16, No.1, pp.65-90.

30. Mannar, K., Ceglarek, D., 2004, "Continuous Failure Diagnosis for Assembly Systems using Rough Set Approach," Annals of CIRP, Vol.53/1, pp. 39-42.

31. Takata, S., Kimura, F., Van Houten F.J.A.M., Westkamper, E., Shpitalni, M., Ceglarek D., Lee, J.,  2004,"Maintenance: Changing Role in Life Cycle Management," Annals of the CIRP, Vol. 53/2, pp. 643-655.  Keynote Paper for the 2004 CIRP General Assembly.

32. Camelio, J., Hu, S.J., Ceglarek, D., 2004, "Impact of Fixture Design on Sheet Metal Assembly Variation," Journal of Manufacturing Systems, Vol. 23, No. 3, pp. 182-193.

2005

33. Ding, Y., Jin, J., Ceglarek, D., Shi, J., 2005, "Process-Oriented Tolerancing for Multi-station Assembly Systems," IIE Transactions on Design and Manufacturing, Vol. 37, No. 6, pp. 493-508. The paper was also summarized and featured in the June 2005 edition of Industrial Engineer (formerly IIE Solutions). " View The Summary".

34. Kong, Z., Huang, W., Ceglarek, D. 2005, "Visibility Analysis for Assembly Fixture Calibration using Screen Space Transformation,"  ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 126, No.3. pp. 622-634.

  35. Wang, H, Ceglarek, D., 2005, "Quality-driven Sequence Planning for Compliant Structure Assemblies" Annals of CIRP, 54/1.pp.31-35.

 2006

36. Kong Z., Kumar, R., Gogineni, S., Zhou, Y., Ceglarek, D., 2006, "Stream of Variation Analysis for Multiple Station Assembly Process with Consideration of Various Tolerance Modes," Transactions of NAMRI, Vol. 34, pp. 469-476.

37. Kawalec, A., Wiktor, J., Ceglarek, D., 2006, " Comparative Analysis of Tooth Root Strength Using ISO and AGMA Standards in Spur and Helical Gears with FEM-based Verification,"  ASME Trans., Journal of Mechanical Design Vol. 128, No. 5, pp. 1141-1158.

38. Mannar, K., Ceglarek, D., Niu, F., Abifaraj, B., , 2006, "Fault Region Localization (FRL): Product and Process Improvement Based on Field Performance and Distributed Manufacturing Measurements," IEEE Trans. on Automation Science and Engineering, Vol. 3(4), pp. 423-439.

39. Chen, Y., Ding, Y., Jin, J., Ceglarek, D., 2006, "Integration of Process-Oriented Tolerancing and Maintenance Planning in Design of Multi-station Manufacturing Processes," IEEE Trans. on Automation Science and Engineering, Vol. 3(4), pp. 440-453.

40. Lee, NKS., Yu, G., Joneja, A., Ceglarek, D., 2006, "The Modeling and Analysis of Butting Assembly in the Presence of Workpiece Surface Roughness and Part Dimensional Error,"  International Journal of Advanced Manufacturing Technology Vol. 31 No. 5-6, pp. 528-538.

41. Kong, Z., Ceglarek, D. 2006,  "Fixture Workspace Synthesis for Reconfigurable Assembly Systems",  Journal of Manufacturing Systems, Vol. 25(1), pp. 25-38.

 2007

42. Loose, J-P., Zhou, S., Ceglarek D., 2007, “Kinematic Analysis of Dimensional Variation Propagation for Multistage Machining Processes with General Fixture Layouts,” IEEE Transactions on Automation Science and Engineering Vol. 4(2), pp. 141-152.

43. Phoomboplab, T., Ceglarek, D., 2007, "Design Synthesis Framework for Dimensional Management in Multi-Station Assembly Systems,"  Annals of CIRP, 56/1, pp. 153-158.

44. Huang, W., Lin, J.,, Bezdecny M., Kong, Z., Ceglarek, D., 2007, "Stream-of-Variation Modeling I: A Generic 3D Variation Model for Rigid Body Assembly in Single Station Assembly Processes," ASME Trans. on Journal of Manufacturing Science and Engineering, Vol. 129(4), pp. 821-831.

45. Huang, W., Lin, J., Kong, Z., Ceglarek, D., 2007, "Stream-of-Variation (SOVA) Modeling II: A Generic 3D Variation Model for Rigid Body Assembly in Multi Station Assembly Processes," ASME Trans. on Journal of Manufacturing Science and Engineering, Vol. 129(4), pp. 832-842.

 2008

46. Kong, Ceglarek, D., Huang, W., 2008, "Multiple Fault Diagnosis Method in Multi-station Assembly Processes Using Orthogonal Diagonalization Analysis," ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 130 No. 031014, February 2008.

47. Loose, J., Zhou, S., Ceglarek, D., 2008, "Variation source identification in Manufacturing Processes Based on Relational Measurement of Key Product Characteristics,"  ASME Trans. on Journal of Manufacturing Science and Engineering, Vol. 130, No. 001007, June 2008.   

48. Phoomboplab, T., Ceglarek, D., 2008,“Process Yield Improvement through Optimal Design of Fixture Layout in 3D Multi-station Assembly Systems ,”  ASME Trans., Journal of Manufacturing Science and Engineering, Vol. 130 No. 061005, December 2008.

49. Mannar, K., Ceglarek, D., 2008, “Functional Capability Space and Optimum Process Adjustments for Manufacturing Processes with In-specs Failures,” accepted to IIE Transactions on Quality and Reliability, Special Issue on Quality Control for Multistage Systems.

2009

50. Huang, W., Phoomboplab, T., Ceglarek, D., 2009, “Process Capability surrogate Model Based Tolerance Synthesis of Multi-Station Manufacturing Systems (MMS),” IIE Trans., Vol. 41, pp. 1-14.

51. Wang, H, Ceglarek, D., 2009, “Product and Process Modeling and Variation Propagation Analysis at Preliminary Design Phase for Multi-station Sheet Metal Assemblies,” Assembly Automation, Vol. 29, No. 2.

52. Shukla, N., Khilwani, N., Tiwari, M.K., Ceglarek, D., 2009, “Optimal Sensor Design for Root Cause Diagnosis in Assembly Processes using Data Mining Methods,” conditionally accepted to ASME Transactions, Journal of Computing and Information Science in Engineering.

53. Shukla, N., Ceglarek, D., Tiwari, M.K., 2009, “Algorithm Portfolios for Dynamic Optimization Problems,” Conditionally accepted to Engineering Applications of Artificial Intelligence.

54. Ceglarek D., Prakash, Tripathi A., Kong Z., 2009, "Enhanced Piecewise Least Squares Approach For Diagnosis of Ill-Conditioned Multi-Station Assembly with Compliant Parts," Conditionally accepted to Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

55. Huang, W., Ceglarek, 2009, "Statistical Modal Analysis Methodology for Form Error Modeling with Implementation to Assembly and Stamping Systems with Compliant Parts," accepted to Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture.

56. Wang, H, Ceglarek, D., 2009, "Generation of Assembly Sequences with k-ary Operations," submitted to ASME Trans., Journal of Computing and Information Science in Engineering.

57. Loose, J-P., Zhou, S., Ceglarek, D., 2009, "Dimensional Variation Modeling for Multistage Machining Processes Incorporating Part GD&T Characteristics," submitted to IEEE Transactions on Automation Science and Engineering.

58. Prakash, Ceglarek, D., Tiwari, M.K., 2009, "Fault Failure Diagnosis for Compliant Structure Assemblies Using Statistical Modal Analysis (SMA)," submitted to Transactions of the ASME, Journal of Computing & Information Science in Engineering.  Special Issue on Advances in Computer Aided Manufacturing.

59. Mannar, K., Ceglarek, D., Choubey, S., Sivenpiper, C., 2009, "Diagnosis of Healthcare System Field Failures based on Event Logs," submitted to IIE Transactions, Special Issue on Healthcare Engineering.

60. Prakash, L. Eduardo Izquierdo, D. Ceglarek, 2009, "Functional Process Adjustments for No-Fault-Found Product Failures in Service Caused by In-tolerance Faults," submitted to Annals of CIRP.

61. Shukla, N., Ceglarek, D., Tiwari, M.K., 2009, “An Ant Ordered Evolutionary Bayesian Fault Diagnosis Model for Hydraulic Forging Presses,” to be submitted to IEEE Transactions on Reliability.

62. Mannar, K., Ceglarek, D., Choubey, S., Sivenpiper, C., 2009, "Prognostics of Healthcare System Field Failures based on Event Logs," submitted to IIE Transactions, Special Issue on Healthcare Engineering.

63. Kong, Z., Ceglarek, D. 2009, "Fixture Workspace Synthesis for Hybrid Assembly Systems," to be submitted to IIE Trans.

64. Prakash, M.K., Tiwari M.K., Ceglarek, D., 2009, "Constraint-based Fast Simulated Annealing Approach to Solve the Disassembly Scheduling Problem," submitted to International Journal of Production Research.

65. Huang, W., Ceglarek, D., 2009, "Form Error Variational Class (FE-VC) Generator for Geometric Tolerance Analysis Using Statistical Modal Analysis (SMA)," to be submitted to ASME Trans., Journal of Mechanical Design.

66. Kong, Z., Ceglarek, D., 2009, "Reusability of Fixture Design Knowledge Analysis Using Rework Distance-based Similarity Index," to be submitted to Trans. of ASME, Journal of Mechanical Design.

67. Tsai, L., Mannar, K., Ceglarek, D., 2009, “Fault Localization in Multi-stage Manufacturing Systems,” to be submitted to Journal of Manufacturing Systems

68. Wang, H, Yang, J., Ceglarek, D., 2009, "A Graph-based Assembly Model for Dimensional Control," to be submitted to Trans. of IIE, Design and Manufacturing.

69. Hsieh, P. and Ceglarek, D., 2009, “Modeling and Analysis of Dimensional Variation in Multi-Station Multi-Stream Manufacturing Processes,” to be submitted

70. Prakash, L. Eduardo Izquierdo, D. Ceglarek, 2009, "Functional Process Adjustments for No-Fault-Found Product Failure in Service Caused by In-tolerance Faults: Multi-step Adjustments Senario," to be submitted