Unigraphics Video Tutorials
for more information contact:
Department of Mechanical Engineering
University of Wisconsin - Madison
Welcome to the Unigraphics Video Tutorial homepage!
The software tutorials on this page were created as part of a Technology Enhanced Learning Grant sponsored by the UW- Madison, College of Engineering. Use of these is open to everyone. Please provide feedback where requested.
Use of the Video Tutorials
These tutorials consist of a video feed demonstrating use of the software with a voice-over commentary. When viewing these videos on a CAE network machine, one must use headphones in order to hear the voice-over commentary. Headsets may be attached to the audio output jack of the computer. If viewing on your own machine, you must install a video codec. This codec may be downloaded free at:
Download the TSCC Codec
On the sides of the page you will see navigation tabs for the various tutorials.
After clicking on one of the tabs, you will be directed to a page containing the video. Click on the video once to be able to use the navigation commands(Play, Pause, Skip, etc).
In some of the videos, you will also see jump buttons for subsections of the tutorial on the left hand side of the screen. Click on one of these buttons to be taken to a specific point in the video.
*Check back soon as more tutorials will be added shortly.*